News Index

All News items ‎‎(Sorted by Date)‎‎

  • Ryman Composites Builds Reputation for Telco Antenna Shrouds (Sept 2011) Over the last 3 years Ryman Composites have been commissioned to manufacture some unique and complex shapes and finishes for the shrouding of mobile phone antenna. RF (Radio Frequency) invisibility ...
    Posted Sep 29, 2013, 2:09 AM by Chris Ryman
  • Ryman Composites the Ultimate Supplier of Choice (July 2011) Ryman Composites (then known as NoseCone Manufacturing)  has been selected as the manufacturer of composite components for the latest Ultimate camper – the Nautilus, to be launched at The Caravan Camping ...
    Posted Sep 29, 2013, 2:16 AM by Chris Ryman
  • Australian Square Kilometre Array Pathfinder (ASKAP) Focal Plane Array Weather-shield Installed (June 2011) Ryman Composites completed the Weathershield for CSIRO's Australian Square Kilometre Array Pathfinder (ASKAP) Focal Plane Array Weather Shield.An initial research and development phase included analysing reinforcement requirements, low ...
    Posted Apr 14, 2013, 5:20 AM by Chris Ryman
  • Winnebago Eyre B Class and Esperance A Class Motorhomes Launched (April 2011) The 2011 model Winnebago Eyre B Class and Esperance A Class Motorhomes were officially launched at the 2011 Sydney Caravan & RV Supershow. Following an extensive design and development phase, 5 ...
    Posted Apr 14, 2013, 5:24 AM by Chris Ryman
  • Virtual Reality (VR) Screen produced and installed (December 2011) Our client required a segmented 180 degree transportable rigid screen for installation in training facilities and needed a fast turnaround for an upcoming show. Ryman Composites produced a CNC pattern ...
    Posted Apr 14, 2013, 5:25 AM by Chris Ryman
  • Australian Square Kilometre Array Pathfinder (ASKAP) Focal Plane Array Weather-shield (September 2010) CSIRO has partnered with Ryman Composites to fabricate and supply the Australian Square Kilometre Array Pathfinder (ASKAP) Focal Plane Array Weather Shield. New patterns will be created using 5 axis ...
    Posted Apr 14, 2013, 5:28 AM by Chris Ryman
  • New 3D CNC Router installed (Sept 2010) Ryman Composites has taken delivery and installed a new CNC machine with expanded 3D routing capability and 12 tool auto tool change. The new Tekcel CNC runs on Enroute 3D ...
    Posted Sep 29, 2013, 12:15 AM by Chris Ryman
  • Ryman Composites Commences Manufacture of Carbon Surf Oar Blade (August 2010) Following significant research and development work Ryman Composites have commenced manufacturing Surf Boat Side and Sweep Oar blades for a new client. Previous suppliers had manufactured moulds but had been ...
    Posted Sep 29, 2013, 2:19 AM by Chris Ryman
  • New Model Winnebago Menindee (January 2010) The complete set of moulds for the soon to be released Winnebago Menindee Motorhome were completed in January and the first prototype set delivered. Comprising Nosecap, cab wing / steps, full ...
    Posted Sep 29, 2013, 2:07 AM by Chris Ryman
  • Ryman Composites awarded Winnebago Supplier of the Year 2009 (December 2009) Ryman Composites (then known as NoseCone Australia) has again been awarded the Winnebago Supplier of the Year. Initially won in 2002 and hard fought for among many suppliers both locally ...
    Posted Sep 29, 2013, 12:26 AM by Chris Ryman
  • Calibrated Sphere for Medical Application (Feb 2009) In February 2009 we were approached by a consultant seeking assistance for a project being undertaken by the University of new South Wales (UNSW) on behalf of the Woolcock Institute ...
    Posted Apr 16, 2012, 6:10 PM by Chris Ryman
  • Street-scape Planters by Ryman Composites (with self watering reservoir) Ryman Composites assisted Ace Gutters in Mortdale (NSW) by designing and creating a large planter to contain medium sized trees, meeting with a council requirement for street landscaping outside their ...
    Posted Sep 29, 2013, 12:38 AM by Chris Ryman
  • Articulated Sprayer - All Aussie Design (April 2008) New Era (located in Orange, NSW) has released its latest development - a new design of their original Articulated Sprayer. This uniquely maneuverable and safe crop and vine sprayer is designed ...
    Posted Sep 29, 2013, 2:17 AM by Chris Ryman
  • Complete set of moulds for the Winnebago Longreach Motorhome (March 2008) Ryman Composites (then known as NoseCone Manufacturing) has completed the Winnebago Longreach Motorhome mould and parts - in time for the launch at the Sydney Caravan and Motorhome Show.The 2008 ...
    Posted Sep 29, 2013, 1:37 AM by Chris Ryman
  • Mines Rescue 4.0 iDome Installation (October 2007) The first set of three in an order of 12 iCinema 4.0 iDomes was installed in Lithgow for Mines Rescue NSW. Mines Rescue will have 4 facilities in NSW ...
    Posted Sep 29, 2013, 1:47 AM by Chris Ryman
  • Chemical Fume Fascias Patterns & Moulds (Sept 2007) Ryman Composites (then known as NoseCone Manufacturing) was selected to produce CNC cut pattern and multiple moulds for a range of new and modern Chemical Fume Fascias, to a significantly ...
    Posted Sep 29, 2013, 1:47 AM by Chris Ryman
  • Speaker Cone Mould and Parts (August 2007) Ryman Composites have developed speaker cone moulds and parts to specification for a nightclub installation. This involved the production of a high accuracy speaker extension cone pattern on a lathe ...
    Posted Sep 28, 2013, 11:54 PM by Chris Ryman
  • Tornado / New Era 2000 litre Chemical Trailer Tank (May 2007) Ryman Composites (then known as NoseCone Manufacturing) manufactures this Tornado / New Era 2000 litre Chemical Trailer Tank.This involves production of a common top and two customised tank lower halves ...
    Posted Sep 29, 2013, 1:49 AM by Chris Ryman
  • Skymapper 6.5m Dome Components Shipped (March 2007) Ryman Composites (then known as NoseCone Manufacturing) has shipped the Skymapper 6.5 Dome Components. After 6 months production process, commencing with mould design through to production and part fabrication ...
    Posted Sep 29, 2013, 1:36 AM by Chris Ryman
  • Machine Access Platform - Pultrusion (February 2007) Ryman Composites (then known as NoseCone Manufacturing) designed and built mobile access platforms using a pultrusion process.The client required electrically insulated access to food production machinery. NoseCone designed and ...
    Posted Sep 29, 2013, 1:38 AM by Chris Ryman
  • Skymapper 6.5m Dome Test Assembly (November 2006) The main parts of the 6.5m Skymapper Dome have been manufactured and as part of the QA proceeding (following drilling to our CNC cut jigs) we are required to ...
    Posted Sep 29, 2013, 2:04 AM by Chris Ryman
  • Qantas Rolls Royce Boeing Jet Engine Maintenance Platform (October 2005) Initially Ryman Composites (then known as NoseCone Manufacturing) was approached by Qantas Maintenance to refurbish some old Maintenance platforms. On further review they did not meet OH&S requirements in ...
    Posted Sep 29, 2013, 1:41 AM by Chris Ryman
  • Pontoon – New Deck Mould (Jun 2005) Our client initially required major modifications to an old pontoon deck style. On review, full re-design was undertaken to incorporate larger hatches, stronger walkway mountings, walkway insert for high ...
    Posted Sep 29, 2013, 2:10 AM by Chris Ryman
  • iCinema first installed at Powerhouse Museum (May 2005) Ryman Composites (then known as NoseCone Manufacturing) completed the moulds for UNSW iCinema and  delivered and installed the first 3.0 metre screen at Sydney's Powerhouse Museum. Part of ...
    Posted Sep 29, 2013, 1:38 AM by Chris Ryman
  • Patterns and Moulds for 3.0 m diameter iCinema screen (March 2005) With design agreed and pattern process confirmed, we began the manufacture of the 60° segment for UNSW iCinema project. The 3.0m pattern was spun on a lathe, the flanges ...
    Posted Sep 29, 2013, 2:03 AM by Chris Ryman
  • Tornado 4000 Spray tank mould (March 2005) » Read more about NoseCone's Agricultural Spray Tanks
    Posted Dec 2, 2010, 1:08 AM by Chris Ryman
  • Lotus Elise S2 Splitter (June 2008) In addition to the motor home and camper parts already produced, we have started production of a splitter panel for the Lotus Elise S2 sports car. Manufactured ready to fit ...
    Posted Sep 6, 2010, 6:49 AM by Chris Ryman
  • 6.5 metre "Skymapper" dome (September 2007) As a continuation of our success in the field of dome manufacturing, we were selected to produce the 6.5 metre dome for the Australian National University's new "Skymapper ...
    Posted Sep 29, 2013, 1:43 AM by Chris Ryman
  • 4-metre iCinema dome installed (August 2007) Following on the success of the 3-metre iCinema domes, production has started on 4-metre domes. Part and mould design of both sizes were critical for surface integrity, access ...
    Posted Sep 29, 2013, 2:06 AM by Chris Ryman
  • RTM facilities expanded (July 2007) Our RTM facilities have been expanded again to provide additional capacity for infusion production. More customers and the popularity of the RTM process and the quality and finish of the ...
    Posted Sep 6, 2010, 7:05 AM by Chris Ryman
  • Streetscape planters (January 2007) Production of planters was started. These 1200 x 1200mm planters are used for plantings in a streetscape setting.       » Read more about Industrial Products from Ryman Compositess
    Posted Sep 29, 2013, 2:09 AM by Chris Ryman
  • QANTAS jet engine maintenance platforms (October 2006) QANTAS has selected Nosecone to produce Rolls Royce / Boeing INA service platforms that allow for safe maintenance access for mechanical services inside Boeing 747 engines. Multiple platforms have been ordered ...
    Posted Sep 29, 2013, 1:37 AM by Chris Ryman
  • Agricultural spray tanks (September 2006) Ryman Composites (then known as NoseCone Manufacturing) has started producing agricultural spray tanks for a Sydney customer. NoseCone was engaged to significantly modify an existing design, engineer several additional features ...
    Posted Sep 29, 2013, 1:37 AM by Chris Ryman
  • That’s One Big Spa Bath (June 2005) This impossibly large ‘spa bath’ was built as a one off for a local film production company. For all the effort, it appeared on screen for <10 seconds. Measuring 4 ...
    Posted Sep 29, 2013, 2:03 AM by Chris Ryman
  • iCinema Dome Screen Installed at University of New South Wales (UNSW) (May 2005) The first 3.0 metre hemispherical screen has been successfully installed at UNSW for iCinema. NoseCone manufactured a 1/6 th segment mould from lathe spun composite timber pattern to ...
    Posted Sep 29, 2013, 1:43 AM by Chris Ryman
  • RTM and Pattern Shop Expanded (April 2005) With significant factory space now allocated to our dedicated RTM Resin Infusion area due to customer interest and additional orders for new moulds and conversion of some current production including ...
    Posted Sep 29, 2013, 2:15 AM by Chris Ryman
  • Employee Team of The Year 2003 (December 2003) Ryman Composites (then known as NoseCone Manufacturing) Fibreglass Production crew has won the Employers First Award for Team of the year. Following a very busy year where the crew pulled ...
    Posted Sep 29, 2013, 2:18 AM by Chris Ryman
  • Supplier of the Year 2002 (December 2002) Ryman Composites (then known as NoseCone Manufacturing) has been awarded the Winnebago Supplier of the Year Award for 2002. In recognition of service and quality. This award is greatly appreciated ...
    Posted Sep 29, 2013, 2:16 AM by Chris Ryman
  • CCBM Infusion Licence Granted (May 1999) In 1999 Ryman Composites (then known as NoseCone Manufacturing) took a licence from Arctec Canada for CCBM Infusion System (Closed Cavity Bag Moulding).For both production speed and economy and ...
    Posted Sep 29, 2013, 2:19 AM by Chris Ryman
  • Fiberglass and Panel Business to stand alone (June 1991) NoseCone Manufacturing registered as business and takes over the manufacture, sales and marketing of NoseCone in Australia leaving Aerodynamic Developments to concentrate on Sandwich Panel manufacturing and distribution of Dow ...
    Posted Sep 6, 2010, 6:34 AM by Chris Ryman
  • Composites Institute Member #6 (May 1989) In May 1989, NoseCone became the 6th member of the Composites Institute of Australia. in July 2013 NoseCone Australia changed its name to Ryman Composites.
    Posted Sep 29, 2013, 2:08 AM by Chris Ryman
  • Sidewalls for Winnebago (June 1989) Combining the manufacture of fibreglass flat-sheet, Dow Styrofoam™ core and in house vacuum lamination technology we commenced manufacture of internally framed motorhome sidewalls in June 1989. These panels are ...
    Posted Sep 29, 2013, 12:41 AM by Chris Ryman
  • Vacuum Press Installed (January 1985) NoseCone Australia - the previous name of Ryman Composites took delivery of adhesive application equipment and a vacuum press capable of manufacturing a 13 x 3 mtr trailer side wall. Utilising ...
    Posted Sep 29, 2013, 2:06 AM by Chris Ryman
  • Manufacturing moves to Donald St Guildford Premises (May 1984) Our fibreglass division has taken lease on 10 Donald St Guildford with a view to increasing our manufacturing capacity and assisting in distribution of truck aerodynamic devices plus storage and ...
    Posted Sep 29, 2013, 12:27 AM by Chris Ryman
  • Fielders Bakeries orders Sandwich Panel Bodies (January 1983) Impressed with the quality of fibreglass wind deflectors (NoseCone) fitted to their fleet Fielders requested NoseCone develop a lightweight panellised body for local delivery vehicles to keep to the Class ...
    Posted Sep 29, 2013, 1:40 AM by Chris Ryman
Showing posts 1 - 45 of 45. View more »


All News Items ‎(Sorted Alphabetically)‎



Comments